
Itron Riva Dev Edge Board
The Itron® Riva Dev Edge board is the processing core for the Itron Riva Dev Edge stack and includes the memory and control logic for the stack. This Linux based system can be used in a root or node configuration. In the root configuration, this board hosts the DHCP server. The root acts as a router for the network, supporting Ethernet, WiFi, and a Skyus 4G cellular modem.
In the node configuration, the board relies on a root for an IP address, and can operate locally. The board requires the root and the addition of an Itron Riva Dev Edge RF board to communicate on the RF mesh network. A fully compatible Itron Riva Dev Edge RF board can be purchased separately below.
Board features include:
Add to cart
Board features include:
- 10/100 MBPS Ethernet Port
- 4-pin connector as a serial console for the Linux-based firmware shipped with the board
- Two USB A Host ports
- Two 40-pin expansion connectors for all major I/O types (serial, GPIO, A/D, I2C, SPI)
- iSOM module containing the TI AM335X ARM Cortex Microprocessor, FLASH, RAM, power supply control, clock and other features
- additional 4GB of eMMC Flash memory
Resources
Add to cart

Itron Riva Dev Mini Board
The Itron Riva Dev Mini is a complete Linux system on a module, running a special Linux-distribution named Muse (created by Itron). While the Mini has a smaller footprint than the Edge, the Mini and the Edge boards are software compatible. The Mini provides the ability to embed Itron Riva's adaptive radio frequency communications capability (to support 870 MHz and 920 MHz bands) in a prototype product.
Board features include:
Add to cart
Board features include:
- TI AM335X ARM Cortex Microprocessor
- 900 Mhz 802.15.4g radio
- 1 mini-USB connector
- 40 pin expansion to bring control and communications off the board
- iSOM module containing the processor, FLASH, RAM, power supply control, clock and other features
Resources
Add to cart

Itron Riva Dev LE Board
With a 900 Mhz 802.14.5g radio, the Itron Riva Dev LE board operates at a fixed bandwidth (FSK - 12.5Kbps) which is ideal for low-powered or battery-powered devices.
The board has
- STM32L486 processor
- 1 MB of memory
- 128KB of RAM
- 32-pin I/O expansion connector
- Multiple expansion options (Serial, GPIO, A/D, I2C, SPI)
Resources
Add to cart

Itron Riva Dev Edge RF Board
The Itron Riva Dev Edge RF board contains a DSP (Digital Signal Processor) pre-programmed for 900 Mhz 802.15.4g PHY and MAC operation. The board also provides the two 40-Pin I/O Expansion Connectors so that additional boards may be placed in the stacked.
This board is powered through the Itron Riva Dev Edge board and provides Itron's adaptive wireless radio frequency communication capability.
Add to cart
This board is powered through the Itron Riva Dev Edge board and provides Itron's adaptive wireless radio frequency communication capability.
Resources
Add to cart

Itron Riva Dev Edge PLC Board
The Itron Riva Dev Edge PLC board provides for the addition of wired powerline carrier communication to the Itron Riva Dev Edge board.
Add to cart
Resources
Add to cart