Straight RF antenna

Penta Band Straight Stubby Antenna by Taoglas, works well with the Itron Riva Dev boards and Dev Network Interface Cards.
Add to cart
This is the Penta Band Straight Stubby Antenna by Taoglas, which works well with the Itron Riva B, BLR, Dev Mini, and Dev NIC.

Order this directly from Digi-Key.

An alternative antenna may be purchased here.

Features

  • Small form factor
  • Antenna size W x L x H (8.0 x 8.0 x 48.20mm)
  • Lead free materials
  • RoHS Compliant Product
  • Connector Type: SMA

Applications

  • Penta band EU/US CDMA/DCS/EDGE/GPRS/GSM/HSPA/PCS/UMTS/WCDMA
  • Frequency range: 850 / 900 / 1800 / 1900/ 2100 MHz
  • M2M Applications




RF antenna

Penta Band Right Angle Stubby Antenna by Pulse, which works well with the Itron Riva Dev Edge RF Board.
Add to cart
Order this directly from Digi-Key.
An alternative antenna may be purchased here.

Weight: .8 oz
Dimensions: 6 x 2 x 2 in

Features

  • Small form factor
  • Antenna size W x L x H (18.4 x 8.0 x 49.5mm)
  • Lead free materials
  • RoHS Compliant Product
  • Connector Type: SMA

Applications

  • Penta band EU/US GSM/WCDMA
  • Frequency range: 850 / 900 / 1800 / 1900/ 2100 MHz
  • M2M Applications




RF antenna cable

SMA Female Jack to U.FL Plug, Female Socket, Right Angle
Add to cart

Cable Length: 7.874″ (200.00mm)
CAble Type: 1.13mm OD Coaxial Cable
Max Frequency: 6GHz
Weight: .8 oz
Dimensions: 6 x 2 x 2 in

Purchase directly from DigiKey.

AC/DC Wall adapter

Power supply to be used with the USB Barrel Jack adapter to power the Itron Riva Dev Edge board.
Add to cart

Purchase this directly from DigiKey.

Weight: .8 oz
Dimensions: 2 x 2 x 2 in

Features

  • Outputs 5V, 2A max, and 10W
  • Fixed Blade
  • Very low leakage
  • 5 Star Standby power <0.03W
  • Level VI Compliant
  • OVP, OCP and short circuit protection

AC wall to JST adapter cable

3 Watt 5V output AC wall adapter with a JST-XHP-2 connector for interfacing with the Itron Riva Dev LE board.
Add to cart

This is a 3 Watt 5V output AC Wall Adapter with a JST-XHP-2 connector for interfacing with the Itron Riva B Board and Itron Riva BLR Board.

Cable length is 58 inches.

Itron Riva Dev Mini adapter card

Provides out of the box 4-pin UART and Barrel Jack connector support for the Itron Riva Dev Mini.
Add to cart

The Itron Riva Dev Mini Adapter Card expands the Itron Dev Mini's pins, making them readily accessible. If not being used with an actual breadboard it provides the typical +5 barrel jack connector and 4-pin UART0 connection used in our development kits.

USB-A to Mini USB-A adapter cable

USB 2.0 Cable A Female to Mini A Male adapter.
Add to cart

This is a USB 2.0 Cable A Female to Mini A Male adapter.

Cable length is 0.33′ (100.0mm)

Order this directly from Digi-Key.

USB-A to Micro USB-B adapter cable

Adapts from a USB port to a microUSB port.
Add to cart

This cable adapts from a USB port to a microUSB port, allowing use of a USB port on a computer, laptop, or power supply to provide the Itron Riva Dev board with 5V.

Cable length is 3.28′ (1.00m).

Purchase directly from DigiKey.

USB-A to Serial adapter cable

A USB to TTL level serial UART converter cable is required by the Itron Riva Dev Edge Board to bring UART0 out as the terminal port.
Add to cart

A USB to TTL level serial UART converter cable is required by the Itron Riva Edge Board to bring UART0 out as the terminal port.

Features

  • TTL-232R-RPi Debug cable provides a USB to TTL Serial interface for Raspberry Pi computer.
  • On board FT232RQ provides single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled by the electronics in the USB cable.
  • Connect directly to a microcontroller UART or I/O pins.
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
  • Fully assisted or X-On / X-Off software handshaking.
  • Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
  • Internal EEPROM with user writeable area.
  • 5V safe TTL inputs make the TTL-232R easy to interface to 5V MCU's.
  • FTDI's royalty-free VCP allow for communication as a standard emulated COM port and D2XX 'direct' drivers provide DLL application programming interface.
  • Support for FT232R FTDIChip-ID™ feature for improved security.
  • 3x 'flying leads' outputs provide TXD, RXD and GND signals.
  • Low USB bandwidth consumption.
  • UHCI / OHCI / EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • -40°C to +85°C operating temperature range.
  • Cable length is 1.0m.
  • FCC and CE compliant.

Purchase this directly from Digi-Key.

Barrel Jack adapter - USB to 5.5mm

Adapter from USB port to a 5.5x2.1mm barrel connector, center positive.
Add to cart

This cable provides the Itron Riva Dev Mini baord with 5V through the use of a USB port on computer, laptop, or power supply.

Cable length is 3 feet.

Purchase directly from Sparkfun.